What Stencil Thickness Should I use to Solder Luminus LEDs to PCBs?

Apply solder paste to the PCB pads with a screen or stencil using a thickness range of 0.15mm (0.006”) to 0.25 (0.010”). Luminus recommends you locate the equipment in a controlled environment maintained at a temperature of 23 ± 5C and a relative humidity less than 60%.

See this article for more details:https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components-

 --------------------------------------------------------------------------------------------------------------------

Luminus Website https://www.luminus.com/

Luminus Product Information (datasheets): go to the main page and select Products and then select the type of product you are interested in.

Luminus Design Support (ray files, calculators, ecosystem items: [power supplies, lenses, heatsinks]): go to the main page and select Resources & Tools and select the item you are interested in.

Luminus Product Information sorted by Applications:  go to the main page and select Applications.

Where to buy Samples of Luminus LEDs: https://www.luminus.com/contact/wheretobuy.

--------------------------------------------------------------------------------------------------------------------

Technical Support Contact Information: [e-mail]

Sales Support Contact Information: [e-mail]

Customer Service Support Contact Information: [e-mail]